Fully qualified Tree Surgeon
Available in and around Lochaber Fort William

Tree Removal

There may be several reason why a tree needs to be removed. Whether it’s the condition of the tree, the location of where it is, or even the type of tree it is. We always try to preserve trees as much as possible unless there is no other way to save it. Please contact us to discuss the options first before making a decision.

Some trees will be protected by the local authorities, so an application will have to be made before any work can be carried out. Please check with us or your local council before starting work.

Tree fell – The quickest and safest way to remove a tree is to fell the tree from the ground. This can only be done if there is sufficient space to do so, e.g. enough clearance between the tree and surrounding structures and no electricity or BT lines near the tree.

Climbing, rope and harness access – Another technique that we commonly use is called section felling. This is where our qualified climber accesses the tree using a rope and harness, to cut and free fall sections of the tree. The branches will be cut by the climber down into the agreed drop zone.

Rigging dismantles – We use this technique if there is a high risk of damaging the tree’s surroundings. For example, the tree may be located between two buildings and there is no safe location to free fall the cut wood or branches. For this all wood and branches will be lowered down using one or multiple ropes.

Cherry Picker – It may be that a dead tree is too dangerous to climb or it can’t be felled from the ground. In which case, a MEWP would be necessary for a tree to be removed safely. When carrying out a tree removal with a MEWP, either one or two tree surgeons will go up in the platform and dismantle the tree piece-by-piece.

Crane assisted dismantle – When a tree is located in a very awkward place, or it is a mature tree, then it is often more cost effective and safer to remove a tree with a crane. This would be carried out by a qualified tree climber, to access the tree and strap the branches or wood to the crane. When ready, the climber will cut the wood and the crane will lift, move and lower the wood to the chosen drop zone. This method of tree removal allows the tree to be dismantled in large sections and carried to a location for it to be processed.